Dishmachine Stand
Installation Instructions
FOR JACKSON MODEL:
M24STD-6
Jackson MSC, INC.
P.O. BOX 1060
HWY. 25E
BARBOURVILLE, KY. 40906
FAX (606) 523-9196
PHONE (606) 523-9795
August 7, 2006
P/N 07610-003-26-13 Rev. A
M24STD-6 INSTALLATION INSTRUCTIONS
Figure 3—Applying silicon
• To mount the undercounter dishmachine,
remove the feet from the frame bottom by un-
screwing them.
•Set the unit on top of the stand (minus the
feet) on the platform, lining up the holes in the
frame to the corresponding holes in the plat-
form.
•Secure the unit to the platform by rein-
serting and tightening the feet.
•Verify that the unit is level prior to making
any utility connections. If the unit is not level,
it may operate inefficiently.
After Maintenance Actions:
•
Wipe down the stand to remove any
excess silicon.
•
Once the dishmachine is fully hooked
up and operational (per the manufac-
turer’s instructions), operate the ma-
chine and observe it to ensure that
there is no excessive vibration or any
other source of concern.
Preventative Maintenance:
•
Keep the area under the platform free
of dirt, soil and debris.
•
Clean the stand regularly with a wet
towel to prevent the build-up of residue
and soil.
Installation Instructions 07610-003-26-13
Issued: 08-10-2006 Revised: N/A
3
|
Insignia MP3 Player NS DVB2G DVB4G User Manual
Intel Computer Hardware AN430TX User Manual
Ives Door 31221 User Manual
JBL Speaker BassProTM II User Manual
JVC Car Stereo System 1110DTSMDTJEIN User Manual
Kambrook Water Heater KUR10 User Manual
Kenwood Network Cables KCA iP102 User Manual
KitchenAid Ice Maker KUIS155HPB0 User Manual
Kodak Digital Photo Frame 8942930 User Manual
Konica Minolta Digital Camera DiMAGE Xi User Manual