Insignia Model Vehicle NS 40D420MX16 User Manual

Quick Setup Guide | NS-40D420NA16/NS-40D420MX16  
40" 1080p • 60Hz LED TV  
START HERE  
You’ll need: Soft surface and Phillips screwdriver  
INCLUDED ACCESSORIES  
Remote control and  
two AAA batteries  
WALL MOUNT  
How do I attach the stand to my TV? (not for wall mounting)  
How do I prepare my TV for wall mounting? (not for use with a TV stand)  
1
You’ll need: Soft surface and Phillips screwdriver  
A
B
Carefully place your TV face-down on a cushioned, clean surface.  
B
Carefully place your TV face-down on a  
cushioned, clean surface.  
C
Align the screw holes on the stand column  
with the holes on the back of your TV, then  
secure the column to your TV with the four  
provided M5 × 12 mm screws (the short  
screws).  
A
Align the stand column with the stand  
+
+
Insert four spacers (provided) into the mount screw holes on the back of your TV, then attach the  
wall-mount bracket to your TV using either the four M6 × 30 mm screws (provided) or the screws that  
came with the wall-mount bracket. See instructions that came with the wall-mount bracket for  
information about which screws to use and how to correctly hang your TV.  
Warning: This apparatus is intended to be supported by a UL Listed wall-mount bracket.  
See the instructions that came with your wall mount for more information about how to correctly mount  
your TV.  
base, then secure the column to the base  
with the four provided (ST4 × 16 mm)  
screws (the long screws).  
OR  
C
Stand column  
Stand base  
C
B
A
A
B
M6 x 30 mm screws  
ST4 x 16 mm screws  
C
Your TV has four VESA mounting holes on the back. If you attach a wall-mount  
bracket to the back of your TV, the bracket must be securely attached, using  
all four holes. If you do not use all four mounting holes, your TV may fall and  
cause property damage or personal injury. See the documentation that came with  
your wall mount for complete mounting instructions.  
M5 x 12 mm screws  
ST4 screws (16 mm length) (4 pcs.)  
M5 screws (12 mm length) (4 pcs.)  
Power cord  
MAKING CONNECTIONS  
FEATURES  
2
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?  
WHICH CABLES  
DO YOU HAVE?  
Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.  
However, certain devices must be connected to the ARC jack. See the instructions that came  
with your device for more information.  
Remote control sensor  
Power indicator  
HDMI (BEST)  
Best video quality  
HDMI1/ARC  
WALL MOUNT ACCESSORIES  
M6 screws (30 mm length) (4 pcs.)  
AUDIO/VIDEO OUT  
COMPONENT  
Note: The component and AV jacks are shared. This means you can connect  
only one component or AV device at a time. We suggest upgrading to HDMI  
(BEST) if your device supports it.  
(BETTER)  
Spacers(4 pcs.)  
AV IN  
L
R
- AUDIO -  
OR  
P
P
AV (GOOD)  
AUDIO/VIDEO OUT  
FIND YOUR USER GUIDE ONLINE!  
Support & Service.  
Enter NS-40D420NA16 in the box under  
Manual, Firmware, Drivers & Product  
COMPONENT IN  
AV IN  
Note: Connect the yellow  
video cable to the  
L
R
- AUDIO -  
P
P
green VIDEO/Y jack.  
COMPONENT IN  
HDMI1/ARC  
USB  
Information, then click  
. The  
NS-40D420MX16 comes with a printed  
manual.  
COAXIAL  
(GOOD)  
STOP  
CABLE  
Do not plug your power cord in until all  
other devices have been connected.  
ANT/CABLE  
IN  
Before using your new product, please read these  
instructions to prevent any damage.  
 

Intel Computer Hardware S3420GP User Manual
IOGear Switch GUWH104 User Manual
Jenn Air Ventilation Hood LI3URB W10274314C User Manual
JL Audio Car Speaker SB D DRNGO 10W0 User Manual
JVC Stereo System CA MXJ980V User Manual
Jwin Car Video System JV TV5020 User Manual
Jwin Digital Photo Frame JP 119 User Manual
Kenmore Refrigerator 79576200 User Manual
KitchenAid Dishwasher KUDE60FVPA User Manual
Konica Minolta Copier 771 User Manual