Insignia Computer Hardware NS PCCUP53 User Manual

User Guide  
USB 3.0 PCI Express Card  
NS-PCCUP53/NS-PCCUP53-C  
Before using your new product, please read these instructions to prevent any damage.  
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Avoid touching the gold-plated PCIe bus and the onboard electronic  
components.  
This product is for general computer use. It is not to be used as equipment  
requiring exceptional reliability, particularly when the breakdown or  
malfunction of this product may jeopardize life or health (such as  
aerospace equipment, atomic power control systems, traffic-related  
equipment, transportation equipment, industrial robotics, combustion  
equipment, various safety devices, and life-support systems).  
Features  
Compliant with Universal Serial Bus 3.0 specification Revision 1.0.  
Compliant with Intel xHCI (eXtensible Host Controller Interface) spec. Rev  
1.00.  
Compliant with PCI Express Base Specification Revision 2.0. Single-lane  
(x1) PCI Express (Ver 2.0 Spec.) throughput rates of up to 5 Gbps.  
Supports simultaneous operation of multiple USB 3.0/USB 2.0/USB 1.1  
devices.  
Each USB port supplies a maximum of +5V/900mA power output to a USB  
device.  
Provides two external USB 3.0 SuperSpeed ports.  
Built-in 4-pin power connector for receiving extra power from the system.  
Compatible with a standard PCI Express slot.  
Package contents:  
USB 3.0 PCI Express Card  
Short Backplate  
Windows driver CD  
Quick Setup Guide  
If you need to replace any of these items, call 1-877-467-4289.  
3
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Components  
Card description  
Edge view  
Side view  
USB 3.0  
Ports (2)  
USB 3.0  
Ports (2)  
4-pin power  
connector  
Installing your USB 3.0 PCI Express Card  
System requirements  
PCI Express-enabled system with an available PCI Express x1 slot. (We  
recommend PCI Express 2.0)  
Windows® 8, Windows® 7, Windows Vista®, Windows® XP  
Cautions  
• Opening your computer's case may void your computer's  
warranty. Contact your computer's manufacturer before  
opening the case to make sure that you do not void the  
warranty.  
• Before touching any electronic components, make sure  
that you first touch an unpainted, grounded metal object  
to discharge any static electricity stored on your clothing  
or body.  
• Handle the PCI Express Card adapter by the metal  
mounting bracket and the printed circuit board (PCB)  
edges only. Avoid touching the gold-plated PCIe bus and  
the onboard electronic components.  
Note  
In order to get USB 3.0 SuperSpeed performance, use a PCI  
Express Ver2.0 slot for the card installation. Refer to the user  
manual for your system or motherboard to find the correct slot.  
4
 
   
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Installing the hardware  
Note  
PC components often have sharp metal edges. To prevent injury,  
exercise caution when removing/installing components from  
your PC, especially when exerting force.  
To install the card:  
1
Turn off your computer and unplug the power cord and all cables.  
2
Remove your computer's case cover. See your computer's user guide  
for information about removing the cover.  
3
Locate an available PCI Express slot, remove the screw that secures the  
backplate (the small piece of metal that covers the opening for the PCI  
card on the back panel of your computer), then remove the backplate.  
If you are using a slim desktop computer, attach the included short  
backplate prior to installation.  
To change backplates, remove the screws that secure the standard  
backplate to the PCI card, remove the standard backplate, then attach  
the short backplate with the screws you removed.  
4
5
Carefully insert the adapter into the PCIe x1 slot, seating it firmly into  
the slot. Do not touch the metal connector on the adapter.  
Connect an available floppy 4-pin power plug from your PC's power  
supply to the adapter card's 4-pin power connector.  
Power  
supply  
4-pin  
floppy  
power  
PCI slot x16  
PCIe slot  
x16  
PCIe slot  
x1  
6
Secure the adapter to the case using the screw you removed from the  
backplate.  
7
8
Reinstall your computer's case cover.  
Plug in the power cord and other cables, and then turn on your  
computer.  
5
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Windows driver installation  
Note  
The USB 3.0 driver is only for the Windows operating system.  
(Only Windows XP through Windows 7 requires the driver,  
Windows 8 does not.) It does not support Mac and Linux  
operating systems.  
To install the Windows driver:  
1
Save all files and close all programs. Insert the included driver CD into  
your optical drive. The driver home page opens.  
2
Click Install Driver. The installation wizard opens.  
6
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
3
4
5
6
Click Next, then follow the on-screen instructions to install the driver.  
The End User License Agreement page opens.  
Select I accept the terms of the license agreement, then click Next.  
The install screen opens.  
Click Install to begin the installation. When the installation process is  
complete, the InstallShield Wizard Complete screen opens.  
Click Finish to complete the process.  
To verify the driver installation:  
1
Click Start, right-click Computer (or My Computer), then select  
Properties.  
2
3
Click Device Manager, then click Universal Serial Bus controllers.  
If the device has been correctly installed, its sub-entry should be  
displayed as Renesas Electronics USB 3.0 Host Controller and  
Renesas Electronics USB 3.0 Root Hub.  
To uninstall the Windows driver:  
1
2
3
Click the Add or Remove Programs tab (Uninstall a Program in  
Windows 7) in the Windows Control Panel.  
Click the Remove button to uninstall the Insignia USB 3.0 PCI Express  
Card Driver.  
Click Finish to complete the driver uninstall procedure.  
7
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Troubleshooting  
Check the following guide for the possible causes and solutions for a  
problem before contacting the nearest service center or dealer for repairs.  
14  
Symptom  
Solution  
The Windows Device  
Make sure that the PCI Express Card adapter is correctly installed in  
Manager does not show  
the Renesas Electronics  
USB 3.0 Host Controller.  
the PCIe slot.  
Remove the adapter and try a different PCIe slot in case the bus has  
conflicts.  
Repeat the driver installation procedure, then make sure that the  
device exists. Right-click Computer in the Start menu (or My  
Computer on your desktop), click Properties, then click the Device  
Manager. If the Renesas Electronics USB 3.0 Host Controller is  
shown, the PCI Express Card adapter is working correctly.  
Make sure that your computer's operating system is updated to the  
latest version.  
No USB peripheral is  
detected by the  
computer.  
Make sure that all cables are correct and securely connected.  
Make sure that the USB device's power is turned on.  
Make sure that the devices are getting enough power.  
Make sure to plug the 4-pin power cable into the adapter card to  
provide sufficient power to USB devices, or use self-powered USB  
devices.  
A long cable may cause poor performance. A USB repeater must be  
used if the cable is longer than 3.5 meters.  
Make sure that there is no problem with the adapter installation.  
Conflict with other  
Windows USB PCI  
adapters.  
Conflicts are indicated by an entry in the Device Manager with a red  
X or yellow exclamation point.  
Turn off your computer and move the adapter to another available  
slot, then re-install the USB 3.0 driver.  
An exclamation point n the Device Manager usually means there is a  
resource conflict between this adapter and another adapter in your  
system. Move the adapter to another slot, then restart your computer.  
Windows will re-configure itself and re-assign resources. Check your  
device manager again.  
8
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Specifications  
USB 3.0 host controller  
Max. data transfer rate  
I/F to PC  
Renesas uPD720202  
USB 3.0 : 5.0Gbps  
PCI Express2.0 x 1  
External ports  
2x USB 3.0 type A  
(Support SuperSpeed/ High-Speed/Full-Speed/Low-Speed)  
Power input  
4-pin power connector  
Power output  
DC +5V/ Max. 900mA  
System support  
Dimensions (H x W x D)  
Windows® 8, Windows® 7, Windows Vista®, Windows® XP  
4.72 × 3.19 × 0.86 in  
(120 × 81 × 22 mm)  
Operating temperature  
Storage temperature  
32°F~104°F  
(0°C~40°C)  
-4°F~140°F  
(-20°C~60°C)  
Operating humidity  
Certification  
0%~80% RH, non-condensing  
FCC Class B, ICES, SuperSpeed USB compliance  
9
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired operation  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measure  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help  
Warning: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
IC Statement:  
This equipment complies with the applicable technical standard of ICES-003 issue 5 August  
2012 Information Technology Equipment (ITE) – Limits and methods of measurement,  
according to the measurement procedures specified in Canadian Standards Association  
Standard CAN/CSA-CISPR 22-10.  
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)  
Notices  
Specifications and features are subject to change without notice or obligation.  
For service and support call 1-877-467-4289.  
10  
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
One-year limited warranty - Insignia  
Definitions:  
The Distributor* of Insignia branded products warrants to you, the original purchaser of this  
new Insignia-branded product (“Product”), that the Product shall be free of defects in the  
original manufacturer of the material or workmanship for a period of one (1) year from the  
date of your purchase of the Product (“Warranty Period”).  
For this warranty to apply, your Product must be purchased in the United States or Canada  
from a Best Buy branded or Future Shop branded retail store or online at www.bestbuy.com,  
www.bestbuy.ca, or www.futureshop.ca and is packaged with this warranty statement.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product.  
Your purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location, please take  
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that  
you place the Product in its original packaging or packaging that provides the same amount  
of protection as the original packaging. If you purchased the Product from a Best Buy or  
mail your original receipt and the Product to the address listed on the web site. Make sure  
that you put the Product in its original packaging or packaging that provides the same  
amount of protection as the original packaging.  
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct  
the issue over the phone.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or Future Shop  
branded retail stores or websites to the original purchaser of the product in the county  
where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to weather, lightning, and other acts of God, such as power surges  
Accidental damage  
Misuse  
Abuse  
11  
 
 
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business or in  
communal areas of a multiple dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Display panel damaged by static (non-moving) images applied for lengthy periods  
(burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly  
illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up  
to five (5) pixel failures throughout the display. (Pixel based displays may contain a  
limited number of pixels that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids, gels or  
pastes.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE  
REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL  
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY  
ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY  
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in Taiwan  
12  
 
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in Taiwan  
V1 ENGLISH  
14-0325  
 

Ingersoll Rand Automobile Parts 650934 XX3 C User Manual
Init TV Video Accessories NT C3002 User Manual
Intel Computer Hardware SSDSC2BW120A301 User Manual
Invacare Wheelchair 9000 SL User Manual
iSimple Automobile Accessories ISSR12 User Manual
JVC Camcorder 0206ASR NF VM User Manual
JVC Stereo System CA HXZ3 User Manual
Karcher Pressure Washer K 320 M User Manual
Kawasaki Utility Trailer ZX 9R User Manual
Kenwood DVD Player KDV 3241Y User Manual