|
Quick Setup Guide NS-32D420NA16
32" FHD 60Hz • DLED TV
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
START HERE
WALL MOUNT
1
How do I attach the stand to my TV? (not for wall mounting)
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: Soft surface and Phillips screwdriver
You’ll need: Soft surface and Phillips screwdriver
+
+
B
Align the screw holes on the TV stands with the
holes on the back of your TV, then secure each OR
stand to your TV with two of the provided
screws.
A
Carefully place your TV face-down on a cushioned,
clean surface.
B
See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
A
Carefully place your TV face-down on a
cushioned, clean surface.
Your TV has four VESA mounting holes on the back. If you attach a wall-mount
bracket to the back of your TV, the bracket must be securely attached,
using all four holes. If you do not use all four mounting holes, your TV may
fall and cause property damage or personal injury. See the documentation
that came with your wall mount for complete mounting instructions.
TV stands
A
A
M4 screws (14 mm length)
B
M4 screws (14 mm length) (4 pcs.)
Front
Power adapter
FEATURES
MAKING CONNECTIONS
2
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player, game console, or tablet?
Remote control sensor
Power indicator
WHICH CABLES
DO YOU HAVE?
Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.
However, certain devices must be connected to the ARC jack. See the instructions
that came with your ARC device for more information.
HDMI (BEST)
Best video quality
AUDIO/VIDEO OUT
COMPONENT
Note: The component and AV jacks are shared. This means you can connect
only one component or AV device at a time. We suggest upgrading to HDMI
(BETTER)
(BEST) if your device supports it.
FIND YOUR USER GUIDE ONLINE!
click Support & Service. Enter
NS-32D420NA16 in the box under
Manual, Firmware, Drivers & Product
Information, then click ►.
OR
STOP
AV IN
DC IN
(12V)
ANT/CABLE
- AUDIO -
L
R VIDEO / Y
PB
PR
IN
AV (GOOD)
AUDIO/VIDEO OUT
Do not plug your power cord in until all
other devices have been connected.
COMPONENT IN
AV IN
DC IN
(12V)
ANT/CABLE
IN
Note: Connect the yellow
video cable to the
- AUDIO -
L
R VIDEO / Y
PB
PR
COMPONENT IN
green VIDEO/Y jack.
Note: Images do not necessarily represent the exact design of your television.
COAXIAL
(GOOD)
CABLE
AV IN
DC IN
(12V)
ANT/CABLE
IN
- AUDIO -
L
R VIDEO / Y
PB
PR
Before using your new product, please read these
instructions to prevent any damage.
COMPONENT IN
|